Benchrite Railgun Boxes$300.00
Railguns are a big investment, but they sure are fun to shoot. We looked and looked for cases when we first started shooting rail guns, but the good ones we found were very expensive. Since we were making loading tables already, the rail boxes sort of made sense. These boxes fit Young Rail Guns, but they can be made for any rail you have. The top box pictured is somewhat taller because a rail cleaning cradle is stored under the lid. This rig uses a 6 riser for the scope, so it has a scope storage pocket. Foam retainer blocks hold the rail top or bottom in place to protect it from bouncing or rolling over. This top box is 37 Â½ long, 12 wide and 12 Â½ tall; the bottom box is 31 long, 15 wide and 9 Â¼ tall. Each set of rail gun boxes is custom made to fit your rail gun and accessories. The top box has a 1 thick shock-foam bottom layer and a 2 thick shock-foam layer on top of that cut out to the contour of the rail gun top. The bottom box has a 1 thick foam layer with a 1 cut out layer on top. All foam is highest quality non-compression gun case foam (not the soft crumbly stuff) from a military case manufacturer. Boxes are Â½ birch cabinet plywood gusseted and glued together, full length piano hinge on both boxes, corner, latch and hold-open hardware is brass, handles are heavy duty steel and are through bolted with flat washers and nylock nuts. Finish is three coats of Minwax satin polyurethane, sanded between coats. These boxes are designed protect your rail gun and hold up under rough use, even if they fall out of the truck. All rail gun boxes are custom made to fit your rig, one to two month lead time. We do not ship rail gun boxes, but will deliver them to any match we are shooting. Give us a call at 260-456-6809 to discuss your rail gun boxes.